Tuning
Ready-made tunes
Already flying one of these frames and want to save an evening in Betaflight? Use the settings I fly myself. Each tune is tailored to a specific motor variant and set of props.
What’s included
- PIDs and filters tuned for your motor variant and props
- Rates - my settings are
- Throttle expo -
- For reference, these builds hover at up to about throttle
The tune assumes your hardware is in good shape, with intact props, unworn bearings and nothing rubbing against the frame. Fix mechanical vibrations at the source.
How it works
The tuning process
I install the tune on your drone myself. Some settings need to be mapped by hand between Betaflight setups, and working on the actual drone lets me verify that everything carried over correctly.
- Get in touch. Tell me what you fly and what you need. For a ready-made tune, click “Ask about this tune” next to your variant. The message fills in the details for you.
- Send me your drone. I’ll send you the address and shipping details when I reply.
- I install and fine-tune the settings. I set the PIDs, filters and rates for the motors and props you actually use. I do it by hand on your drone. Some settings need to be mapped between Betaflight setups, so I take care of that for you.
- I check that everything works. I check each drone individually to make sure the tune was applied correctly.
- You pay and I send your drone back. You pay once I’ve installed and checked the tune. Then I ship the drone back to you.
Custom tuning
I can retune your drone
Built it yourself or had someone else build it, and something feels off? Send it over and I’ll install my setup. I can tune other frames as well as AvionRC.
What I need from you
- Flight controller model and firmware version
- Motors and props you fly with
- Battery you use
- A short flight video if there’s a specific issue
Other work I can do
- Install an ELRS receiver and bind it to your radio
- Install GPS for longer flights, failsafe and finding the drone after a crash
- Install a buzzer to find the drone in the undergrowth
- Apply a water-repellent coating using a spray
I quote each service separately. Tell me what you need and we’ll work it out.